CF ChatterFix
Line Equipment

Vibrating Screen Maintenance

A vibrating screen round is media, springs, the motor guard, and the clamps, locked out. The deck is not a place to stand.

Tracked Components 4
Scheduled PMs 9
Industries Mining & Aggregates

Components To Track

ChatterFix builds these as child assets under vibrating screen, so failure history and PM completions attach to the component that actually failed — not just to the machine.

How Vibrating Screen Actually Fails

The failure modes worth designing a maintenance schedule around — in rough order of what they cost when they happen.

  • Media with a hole left in
  • A broken spring
  • Hold-down bolts loose
  • A motor guard off
  • Someone standing on the deck to look

What To Measure

Recording that a PM was "done" tells you nothing next quarter. These are the readings that let you see a failure coming — and the reason ChatterFix captures measurements against the asset rather than just completions.

  • Media for holes
  • Springs for breaks
  • Motor guard and hold-down bolts
  • Loose media clamps
  • That the deck was not stood on

Spares Worth Stocking

The parts whose absence turns a short repair into a long outage.

Preventive Maintenance Schedule

The PMs ChatterFix schedules against this equipment, with intervals and time estimates.

Weekly · 1.0 hr

Bar Screen Rake and Channel

The bar screen check clears debris from the operating floor after lockout and confirms the rake, the spray, and the e-stop. The technician …

Monthly · 1.5 hr

Granulator Blade & Screen Service

Dull granulator knives generate fines and dust instead of clean regrind. Fines change the bulk density feeding the throat, which destabilis…

Weekly · 1.5 hr

Jaw Crusher Wear and Guard

The jaw crusher check looks at the plates, the toggle seat, and the flywheel guard with the wheel stopped and locked out. The technician wr…

Monthly · 1.5 hr

Machine Guarding & Light Curtain Test

The clamp on a molding machine develops enough force to be immediately fatal. Gate interlocks and light curtains are the controls that stan…

Monthly · 1.5 hr

Machine Guarding Inspection

Guards and interlocks get defeated for good short-term reasons — a changeover is faster with the guard off, and it never gets put back. Sch…

Quarterly · 1.0 hr

PTO & Machine Guarding Inspection

A power take-off shaft turns at 540 or 1000 rpm with enough torque to be entirely indifferent to a human body. Entanglement is measured in …

Monthly · 1.5 hr

Process Pump Seal and Guard Inspection

The process pump seal is inspected at rest, locked out and isolated, with the flange still made up. The technician writes the as-found read…

Monthly · 1.0 hr

Slip/Trip & Guarding Walk

Wet processing floors make slips the most common recordable injury in food and beverage plants. Drainage, matting, and condensation managem…

Weekly · 1.0 hr

Vibrating Screen Media and Spring

The vibrating screen check is the media, the springs, and the motor guard, with the screen locked out. The technician writes the as-found r…

Common Questions

What maintenance does vibrating screen need?
ChatterFix schedules 9 routines against this asset: bar screen rake and channel (weekly), granulator blade & screen service (monthly), jaw crusher wear and guard (weekly), machine guarding & light curtain test (monthly), machine guarding inspection (monthly), pto & machine guarding inspection (quarterly), process pump seal and guard inspection (monthly), slip/trip & guarding walk (monthly), vibrating screen media and spring (weekly). The readings that matter most are media for holes.
How does vibrating screen usually fail?
The most common modes are: media with a hole left in; a broken spring; hold-down bolts loose; a motor guard off; someone standing on the deck to look. Most of these degrade gradually rather than failing outright, which is what makes interval-based inspection worthwhile.
What spare parts should we stock?
Screen media panel, Spring, Clamp, Motor guard fasteners, The site's spare media of the same opening. The test is lead time, not cost: stock the part whose absence turns a two-hour repair into a two-week outage, even if it is cheap.
Can I track this in ChatterFix?
Yes. Pick your industry at signup and vibrating screen is created as an asset with its 4 tracked components, with its PM schedule already attached. Technicians then log readings and findings against it by voice rather than typing them in.

Where It Fits

Get Vibrating Screen Into A Real CMMS

ChatterFix builds this asset, its components, and its PM schedule automatically when you pick your industry — then your technicians update it by talking, not typing.