CF ChatterFix
Line Equipment

Fertigation Skid Maintenance

A fertigation skid round is the pump seal, the injector, the tank, and the pH the installed probe shows, with the pump stopped. Nutrient concentration and pH setpoint are not maintenance inputs.

Tracked Components 4
Scheduled PMs 10
Industries Cannabis Cultivation & Processing

Components To Track

ChatterFix builds these as child assets under fertigation skid, so failure history and PM completions attach to the component that actually failed — not just to the machine.

How Fertigation Skid Actually Fails

The failure modes worth designing a maintenance schedule around — in rough order of what they cost when they happen.

  • A setpoint moved to match a drifting probe
  • A leak tightened while the skid is running
  • Unlabeled tubing
  • An injector seal weeping
  • A nutrient concentration changed on this work order

What To Measure

Recording that a PM was "done" tells you nothing next quarter. These are the readings that let you see a failure coming — and the reason ChatterFix captures measurements against the asset rather than just completions.

  • Seal, injector, and tank with the pump stopped
  • The pH reading the installed probe shows
  • Tubing kinks and labels
  • That concentration and pH setpoint were not changed
  • That a leak was isolated and written up

Spares Worth Stocking

The parts whose absence turns a short repair into a long outage.

Preventive Maintenance Schedule

The PMs ChatterFix schedules against this equipment, with intervals and time estimates.

Monthly · 1.0 hr

Chemical Feed Pump Calibration Record

The chemical feed pump check records stroke and speed as found and looks for leaks without opening the chemical line. The technician writes…

Every 2 weeks · 1.0 hr

Dewatering Pump Seal and Hose

The dewatering pump check is the seal and the discharge hose, with the pump isolated, looked at from the access the site allows. The techni…

Semi-annual · 3.5 hr

Dye Vessel & Pump Service

Shade reproducibility depends on the dye liquor contacting the fabric evenly at a controlled temperature, which means the circulation pump …

Annual · 5.0 hr

Fermentation Tank Inspection & Passivation

Stainless is only stainless while its passive layer is intact. Chlorides, aggressive cleaning chemistry and mechanical damage strip it, and…

Every 2 weeks · 1.0 hr

Fertigation Skid Pump and Probe

The fertigation skid check is the pump seal, the injector, the tank, and the pH reading the installed probe already shows. The technician w…

Annual · 4.0 hr

Irrigation Pivot & Pump Service

A pivot applies water on the assumption that every nozzle delivers its design rate. Nozzles wear and enlarge gradually, so application beco…

Quarterly · 3.0 hr

Lift Station Pump Service

A lift station is unattended infrastructure whose failure mode is a sanitary sewer overflow — raw sewage into a street or watercourse, whic…

Monthly · 1.0 hr

Medical Vacuum Pump Inlet Inspection

The medical vacuum pump check is the inlet filter and the receiver pressure on the gauge that is already there. The technician writes the a…

Monthly · 1.5 hr

Process Pump Seal and Guard Inspection

The process pump seal is inspected at rest, locked out and isolated, with the flange still made up. The technician writes the as-found read…

Every 2 weeks · 2.0 hr

Purified Water Skid Sanitization Record

The purified water skid record is conductivity, loop temperature, and lamp hours at the sample point the site already named. The technician…

Common Questions

What maintenance does fertigation skid need?
ChatterFix schedules 10 routines against this asset: chemical feed pump calibration record (monthly), dewatering pump seal and hose (every 2 weeks), dye vessel & pump service (semi-annual), fermentation tank inspection & passivation (annual), fertigation skid pump and probe (every 2 weeks), irrigation pivot & pump service (annual), lift station pump service (quarterly), medical vacuum pump inlet inspection (monthly), process pump seal and guard inspection (monthly), purified water skid sanitization record (every 2 weeks). The readings that matter most are seal, injector, and tank with the pump stopped.
How does fertigation skid usually fail?
The most common modes are: a setpoint moved to match a drifting probe; a leak tightened while the skid is running; unlabeled tubing; an injector seal weeping; a nutrient concentration changed on this work order. Most of these degrade gradually rather than failing outright, which is what makes interval-based inspection worthwhile.
What spare parts should we stock?
pH probe, Injector seal kit, Tubing the site standardizes, Pump seal, Tank lid gasket. The test is lead time, not cost: stock the part whose absence turns a two-hour repair into a two-week outage, even if it is cheap.
Can I track this in ChatterFix?
Yes. Pick your industry at signup and fertigation skid is created as an asset with its 4 tracked components, with its PM schedule already attached. Technicians then log readings and findings against it by voice rather than typing them in.

Where It Fits

Get Fertigation Skid Into A Real CMMS

ChatterFix builds this asset, its components, and its PM schedule automatically when you pick your industry — then your technicians update it by talking, not typing.